Please use this identifier to cite or link to this item:
https://cuir.car.chula.ac.th/handle/123456789/21855
Full metadata record
DC Field | Value | Language |
---|---|---|
dc.contributor.advisor | Sarawut Rimdusit | - |
dc.contributor.advisor | Kasinee Hemvichian | - |
dc.contributor.author | Montha Lohweratham | - |
dc.contributor.other | Chulalongkorn University. Faculty of Engineering | - |
dc.date.accessioned | 2012-08-28T13:11:15Z | - |
dc.date.available | 2012-08-28T13:11:15Z | - |
dc.date.issued | 2011 | - |
dc.identifier.uri | http://cuir.car.chula.ac.th/handle/123456789/21855 | - |
dc.description | Thesis (M.Eng.)--Chulalongkorn University, 2011 | en |
dc.description.abstract | Shape memory properties of specimens consisted of aromatic epoxy (E), aliphatic epoxy (N), Jeffamine D230 (D) and BA-a benzoxazine monomer (B) were evaluated. The mole ratio of D/B = 1/0, 0.8/0.2, 0.6/0.4, 0.4/0.6, 0.2/0.8 and 0/1 were used as a mixed curing agent for epoxy system with a fixed E/N mole ratio of 1/1. Effects of BA-a content on thermal, mechanical and shape memory properties of epoxy-based shape memory polymers (SMPs) were investigated by differential scanning calorimetry (DSC), dynamic mechanical analysis (DMA), flexural test and shape recovery test. The results revealed that the obtained SMPs exhibited a higher flexural strength and flexural modulus than those of the unmodified epoxy-based SMP at room temperature and at 20℃ above glass transition temperature (T[subscript g]). The presence of 1 mole BA-a as a curing agent provided the specimen with the highest T[subscript g])., i.e. about 72℃ higher than that of epoxy-based SMP cured by Jeffamine D230. The results of the shape-memory tests suggested that the obtained SMPs showed outstanding shape recovery and shape fixity performances with an addition of the BA-a. All SMP samples needed only a few minutes to fully recover to their original shape. The samples exhibited high shape fixity (98-99%) and shape recovery ratio (90-100%) which increased with increasing recovery temperature. In addition, recovery stress values increased with increasing BA-a mole ratio from 20 kPa to 38 kPa, when BA-a up to 1 mole ratio was added. All of the SMP samples fully recovered to their original shape at the end of 100 cycles with minimum change on their flexural strength. | en |
dc.description.abstractalternative | งานวิจัยนี้ได้ศึกษาสมบัติการจำรูปร่างได้ของระบบพอลิเมอร์ที่มีองค์ประกอบคืออีพอกซีชนิดอะโรมาติก (E), อีพอกซีชนิดแอลิฟาติก (N), สารบ่มชนิด Jeffamine D230 (D) ผสมกับเบนซอกซาซีนมอนอเมอร์(B) โดยสัดส่วนโดยโมลระหว่างสาร D ต่อ สาร B ที่ 1/0, 0.8/0.2, 0.6/0.4, 0.4/0.6, 0.2/0.8 และ 0/1 ได้ถูกนำมาใช้เป็นสารบ่มสำหรับระบบอีพอกซีที่ประกอบไปด้วยอีพวกซีชนิด E และชนิด N ในสัดส่วนโดยโมลคงที่ เท่ากับ 1/1 ซึ่งในงานวิจัยนี้ได้ศึกษาผลของปริมาณเบนซอกซาซีนเรซินในระบบสารบ่มลูกผสมข้างต้น ต่อสมบัติทางความร้อน สมบัติทางกล และสมบัติการจำรูปร่างได้ของระบบพอลิเมอร์ที่จำรูปร่างได้จากอีพอกซี โดยทำการวิเคราะห์ด้วยเทคนิค Differential scanning calorimetry (DSC), Dynamic mechanical analysis (DMA), การทดสอบสมบัติทางกลภายใต้แรงดัดโค้ง และการทดสอบการคืนรูปร่าง จากการศึกษาพบว่า พอลิเมอร์ที่จำรูปร่างได้จากอีพอกซีที่ได้รับการดัดแปรด้วยเบนซอกซาซีนเรซินมีค่าความแข็งแรงและค่าความแข็งเกร็งภายใต้แรงดัดโค้งมากกว่าพอลิเมอร์ที่จำรูปร่างได้จากอีพอกซีดั้งเดิมทั้งที่อุณหภูมิห้องและที่อุณหภูมิสูงกว่าอุณหภูมิการเปลี่ยนสถานะคล้ายแก้ว 20 องศาเซลเซียส จากการเติมเบนซอกซาซีนเรซินสูงสุดที่ปริมาณ 1 โมล เพื่อทำหน้าที่เป็นสารบ่มอีพอกซี ทำให้อุณหภูมิการเปลี่ยนสถานะคล้ายแก้วมีค่าสูงที่สุดซึ่งสูงกว่าค่าที่ได้จากอีพอกซีที่ใช้ Jeffamine D230 เป็นสารบ่มเพียงอย่างเดียวถึง 72 องศาเซลเซียส ผลจากการทดสอบสมบัติการจำรูปร่างได้ แสดงให้เห็นว่าสมรรถนะการคืนรูปร่างและการคงรูปร่างของพอลิเมอร์มีค่าดีขึ้นเมื่อเติมเบนซอกซาซีน โดยพบว่าพอลิเมอร์ที่จำรูปร่างได้จากอีพอกซีที่ดัดแปรด้วยเบนซอกซาซีนที่สัดส่วนต่างๆใช้เวลาในการคืนรูปร่างสู่รูปร่างเดิมอย่างสมบูรณ์เพียง 2-3 นาที และให้ค่าการคงรูปร่างสูงถึง 98-99% รวมทั้งมีอัตราการคืนรูปร่างสูงถึง 90-100% ซึ่งสมบัติเหล่านี้จะเพิ่มขึ้นตามการเพิ่มอุณหภูมิที่ใช้ในการคืนรูปร่าง นอกจากนี้ค่าความเค้นของการคืนรูปร่างจะเพิ่มขึ้นเมื่อปริมาณเบนซอกซาซีนเพิ่มขึ้น โดยเพิ่มขึ้นจาก 20 กิโลปาสคาลเป็น 38 กิโลปาสคาล เมื่อเติมสารบ่มเบนซอกซาซีนที่ปริมาณ 1 โมล เมื่อทำการทดสอบสมบัติทางกลภายใต้แรงดัดโค้งซ้ำ 100 รอบ พบว่าพอลิเมอร์ที่ได้สามารถคืนกลับสู่รูปร่างเดิมได้อย่างสมบูรณ์ โดยที่ความแข็งแรงภายใต้แรงดัดโค้งมีการเปลี่ยนแปลงเพียงเล็กน้อยเท่านั้น | en |
dc.format.extent | 5683463 bytes | - |
dc.format.mimetype | application/pdf | - |
dc.language.iso | en | es |
dc.publisher | Chulalongkorn University | en |
dc.relation.uri | http://doi.org/10.14457/CU.the.2011.1110 | - |
dc.rights | Chulalongkorn University | en |
dc.subject | Shape memory alloys | en |
dc.subject | Epoxy compounds | en |
dc.title | Shape memory polymers from benzoxazine-modified epoxy | en |
dc.title.alternative | พอลิเมอร์ที่จำรูปร่างได้จากอีพอกซีที่ดัดแปรด้วยเบนซอกซาซีน | en |
dc.type | Thesis | es |
dc.degree.name | Master of Engineering | es |
dc.degree.level | Master's Degree | es |
dc.degree.discipline | Chemical Engineering | es |
dc.degree.grantor | Chulalongkorn University | en |
dc.email.advisor | Sarawut.R@Chula.ac.th | - |
dc.email.advisor | No information provided | - |
dc.identifier.DOI | 10.14457/CU.the.2011.1110 | - |
Appears in Collections: | Eng - Theses |
Files in This Item:
File | Description | Size | Format | |
---|---|---|---|---|
montha_lo.pdf | 27.22 MB | Adobe PDF | View/Open |
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.